=Supported & Tested Software=
- SolidWorks 2017
- MathCAD Prime 4.0
- MATLAB 2017a
=Downloads=
=== CoEN Tunneling Software
https://www.cse.unr.edu/~newellz2/tunnel.exe
===MATLAB 2018a
Windows 64bit
https://www.cse.unr.edu/~newellz2/R2018a.exe
===MathCAD Prime 4.0
Windows 64bit
https://www.cse.unr.edu/~newellz2/MathCADPrime4.exe
===Solidworks 2018 SP3
Windows 64bit
TODO
=Installation Instructions
==Standalone==
===Windows 10===
If you receive the screen below:
{F495}
Click "More Info" then "Run anyway"
{F497}
=MATLAB Installation=
# Decompress zip file
# In the R2018a folder, run "MATLAB2018a.bat".
# Enter your NetID and password when prompted.
=MathCAD Prime 4.0 Manual Installation=
# Copy "4.0" folder to desktop
# Run the Installation assistant (named 'setup')
# Check Mathcad Prime and Utilities (make sure .NET is marked)
{F419}
# Click Finish
{F421}
# To get the Tunneling exec: http://www.cse.unr.edu/~newellz2/tunnel.exe (only needed if trying to use off campus)
{F423}
# Click on tunnel and login with NETiD to use (must be tunneling to work off campus)
{F425}
# Open MathCAD and set up using existing license
{F427}
# Enter these: Server Name: localhost, Port: 7788
{F429}
# Check the licensing by clicking the MathCAD icon (upper left) -->Options-->License
=SolidWorks Installation=
# Decompress zip file (extract, folder might not be called "2017")
{F449}
# In the 2017 folder use the "startwinstall" it should be in all lowercase
{F431}
# A black terminal window should popup and sit idle, this is the application installing the software and the window should close upon completion.
{F433}
# Upon Completion there should be these icons on the desktop.
{F435}