=Prerequisites You now have to install 7zip to extract the archives. Windows 10 blocks self extracting (exe) archives now. https://www.7-zip.org/download.html (.msi 64-bit x64) =Supported & Tested Software= - MathCAD Prime 4.0 =Downloads= === CoEN Tunneling Software https://www.cse.unr.edu/~newellz2/tunnel1.exe ===MathCAD Prime 4.0 Windows 64bit https://www.cse.unr.edu/~newellz2/MathCADPrime4.7z =Installation Instructions ==Standalone== ===Windows 10=== If you receive the screen below: {F495} Click "More Info" then "Run anyway" {F497} =MATLAB Installation= # Decompress zip file # In the R2018a folder, run "MATLAB2018a.bat". # Enter your NetID and password when prompted. =MathCAD Prime 4.0 Manual Installation= # Copy "4.0" folder to desktop # Run the Installation assistant (named 'setup') # Check Mathcad Prime and Utilities (make sure .NET is marked) {F419} # Click Finish {F421} # To get the Tunneling exec: http://www.cse.unr.edu/~newellz2/tunnel1.exe (only needed if trying to use off campus) {F423} # Click on tunnel and login with NETiD to use (must be tunneling to work off campus) {F425} # Open MathCAD and set up using existing license {F427} # Enter these: Server Name: localhost, Port: 7788 {F429} # Check the licensing by clicking the MathCAD icon (upper left) -->Options-->License =SolidWorks Installation= # Decompress zip file (extract, folder might not be called "2017") {F449} # In the 2017 folder use the "startwinstall" it should be in all lowercase {F431} # A black terminal window should popup and sit idle, this is the application installing the software and the window should close upon completion. {F433} # Upon Completion there should be these icons on the desktop. {F435}

=Prerequisites You now have to install 7zip to extract the archives. Windows 10 blocks self extracting (exe) archives now. https://www.7-zip.org/download.html (.msi 64-bit x64) =Supported & Tested Software= - MathCAD Prime 4.0 =Downloads= ===MathCAD Prime 4.0 Windows 64bit https://www.engr.unr.edu/software/mathcad/ https://www.engr.unr.edu/software/mathcad/tunnel.exe =Installation Instructions ==Standalone== ===Windows 10=== If you receive the screen below: {F495} Click "More Info" then "Run anyway" {F497} =MathCAD Prime 4.0 Manual Installation= # Copy "4.0" folder to desktop # Run the Installation assistant (named 'setup') # Check Mathcad Prime and Utilities (make sure .NET is marked) {F419} # Click Finish {F421} # To get the Tunneling exec: http://www.cse.unr.edu/~newellz2/tunnel1.exe (only needed if trying to use off campus) {F423} # Click on tunnel and login with NETiD to use (must be tunneling to work off campus) {F425} # Open MathCAD and set up using existing license {F427} # Enter these: Server Name: localhost, Port: 7788 {F429} # Check the licensing by clicking the MathCAD icon (upper left) -->Options-->License =SolidWorks Installation= # Decompress zip file (extract, folder might not be called "2017") {F449} # In the 2017 folder use the "startwinstall" it should be in all lowercase {F431} # A black terminal window should popup and sit idle, this is the application installing the software and the window should close upon completion. {F433} # Upon Completion there should be these icons on the desktop. {F435}

=Prerequisites You now have to install 7zip to extract the archives. Windows 10 blocks self extracting (exe) archives now. https://www.7-zip.org/download.html (.msi 64-bit x64) =Supported & Tested Software= - MathCAD Prime 4.0 =Downloads= === CoEN Tunneling Software https://www.cse.unr.edu/~newellz2/tunnel1.exe ===MathCAD Prime 4.0 Windows 64bit https://www.cseengr.unr.edu/software/mathcad/ https://www.engr.unr.edu/~newellz2/MathCADPrime4.7zsoftware/mathcad/tunnel.exe =Installation Instructions ==Standalone== ===Windows 10=== If you receive the screen below: {F495} Click "More Info" then "Run anyway" {F497} =MATLAB Installation= # Decompress zip file # In the R2018a folder, run "MATLAB2018a.bat". # Enter your NetID and password when prompted. =MathCAD Prime 4.0 Manual Installation= # Copy "4.0" folder to desktop # Run the Installation assistant (named 'setup') # Check Mathcad Prime and Utilities (make sure .NET is marked) {F419} # Click Finish {F421} # To get the Tunneling exec: http://www.cse.unr.edu/~newellz2/tunnel1.exe (only needed if trying to use off campus) {F423} # Click on tunnel and login with NETiD to use (must be tunneling to work off campus) {F425} # Open MathCAD and set up using existing license {F427} # Enter these: Server Name: localhost, Port: 7788 {F429} # Check the licensing by clicking the MathCAD icon (upper left) -->Options-->License =SolidWorks Installation= # Decompress zip file (extract, folder might not be called "2017") {F449} # In the 2017 folder use the "startwinstall" it should be in all lowercase {F431} # A black terminal window should popup and sit idle, this is the application installing the software and the window should close upon completion. {F433} # Upon Completion there should be these icons on the desktop. {F435}